Results 1 to 7 of 7
Thread: installing reversing valve
-
29-04-2013, 06:05 PM #1
installing reversing valve
hi
is there difference in installing reversing valve horizontally
or vertically
some split unit came with reversing valve mounted horizontally
DSC_2241.jpg
or vertically
DSC_2243.jpg
does that matter or not
-
29-04-2013, 08:31 PM #2
Re: installing reversing valve
I don't think it makes much difference, if replacing one then make sure its the same way as when the factory made the unit, then it should work as designed.
Mostly found in Oxfordshire, UK :)
-
29-04-2013, 08:43 PM #3
-
29-04-2013, 09:18 PM #4
Re: installing reversing valve
http://www.invensyscontrolseurope.co...t.aspx?id=3615
mounting can be in any position, as its only a solonoid and a piston.
-
29-04-2013, 09:24 PM #5
-
30-04-2013, 11:45 AM #6
Re: installing reversing valve
iv been told not to mount it horizontally with the small capillary lines underneath, as on occasion oil can sit in them and affect the function.
if its horizontal with the capillary lines on top, thats fine.
from someone i work with who used to work in manufacture.
-
30-04-2013, 08:20 PM #7