Results 1 to 12 of 12
Thread: Trane screw compressor oil
-
28-04-2013, 09:23 AM #1
Trane screw compressor oil
Hi! I need to replace oil in Tane screw compressor CHHB 070. The oil type is 025E. I can′t find information about this oil. Viscosity and so on… I want to select analogue of 025E. (R 22). Chiller RTRA108. Can anybody help?
Thanks in advance..
-
28-04-2013, 09:47 AM #2
Re: Trane screw compressor oil
Hi.
As the below indicates.
Both 025E and 050E are semi synthetic 300SUS 68 grade.
Just search for an alternative.
The E denotes European Oil.
Grizzly
OIL00050 Semi-synthetic, viscosity: 300 SUS = 68cSt, eleven 10 litre containers, same asOIL0025E
-
28-04-2013, 11:04 AM #3
Re: Trane screw compressor oil
Emkarate RL 68H should do the trick
-
29-04-2013, 03:07 AM #4
Re: Trane screw compressor oil
Thank you very much for help. Second zero in 0025 was very useful info.
Trane approved oils - http://www.google.ru/url?sa=t&rct=j&...45645796,d.d2k
And else - http://www.google.ru/url?sa=t&rct=j&...45645796,d.d2k
-
29-04-2013, 05:16 AM #5
Trane compressor
Hi All,
I am trying to find some compressor details and was wondering if anyone here can help.
I am cross referencing a Trane Compressor 3E5H80 on R22. Does anyone have information on this compressor?
Many thanks
-
06-06-2013, 07:16 PM #6
Re: Trane screw compressor oil
ISEL
Or should I say Jared of ISEL inc. (Oil suppliers)
Your posts are in direct contravention of this forum.
Snake Oil Salesmen or any direct sales are not what we are about.
Your posts have been reported.
Grizzly
-
19-06-2013, 06:05 AM #7
-
19-06-2013, 12:15 PM #8
-
24-06-2013, 10:29 PM #9
Re: Trane screw compressor oil
I'm not a salesman or trying to sling any snake oil. I'm simply trying to help supplement this forum's knowledge base of lubricants. It appears many just understand oil as oil. I attempt to not directly market or sell anything (especially since we do not sell to end users). I'm simply here to try and help people make a better fluid selection - even if it's not one of ours.
As for the original question. Any POE based fluid in a 68cSt will work just fine. If you notice high R22 dilution into your oil, you may have to step up to a 100cSt. The big thing is to have a minumum viscosity of 7-9cSt at your bearings (which are usually 180-220ºF) POEs generally have a higher viscosity index and better solubility/miscibility with R22 and any lubricants the compressor might have been running prior. POEs do not contain paraffin particles like cracked oils (or base mineral oil) and are more stable oxidatively. There is a reason many OEMs are now shipping their products filled with POE based fluids.
-
08-08-2013, 04:48 PM #10
Re: Trane screw compressor oil
I used Mobil EAL Arctic 68 instead of 025E.
-
11-08-2013, 04:14 PM #11
Re: Trane screw compressor oil
Hi! Else one little question relative to oil replacement. Chiller Dunham Bush ACHDX, horizontal screw also Dunham - HSC 1509. R407C. Can t find info about DB18oil. First of all viscocity.. Can anybody help?
Thanks in advance..
-
26-11-2013, 02:36 PM #12
Re: Trane compressor
The Trane open drive model 'E' eight cylinder - what do you want to know about the nominal 100 TR (R22) based on 60HZ compressor?