I am looking at a SCM pack where I have got the oil foaming on the LT comps. The oil rez on the HT side of the compound system is at receiver pressure 34 bar and when the solenoid on the oil managements is opening to fill it is causing the oil to foam in the sight glass on the oil management system ( teklab oil management system).
The suction pressure of the LT comps is 10 bar I think the problem is the high pressure difference between the LT crankcase pressure and the oil pressure causing the foaming.
The oil is fine on the Dorin HT comps but the problem is only with the Dorin LT comps.
Has anyone come across this before and if so how have you managed to solve the problem thanks in advance.