Results 1 to 3 of 3
Thread: Cooling a small drinks dispenser
-
04-04-2013, 02:47 PM #1
Cooling a small drinks dispenser
Hello!
I am part of a student team designing a refrigerated dispenser that will contain about twenty cans, and we are trying to figure out the best way of doing it. It is for use in a shop and the cans will be loaded into the fridge already chilled.
What size compressor do you think we would need for such a job? The fridge would be enclosed. Also is there are alternative methods of refrigeration that could be used for something like this?
Thanks a million!
Emily
-
04-04-2013, 11:22 PM #2
Re: Cooling a small drinks dispenser
Have a look at Peltier cooling.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
06-04-2013, 11:31 AM #3
Re: Cooling a small drinks dispenser
For something that size, you could also go with absorption. One of the local hotels I looked after recently changed all their room fridges for absorption type ones. They reckoned to get lower energy costs & importantly, lower noise by taking this route.