Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2013
    Location
    UK
    Age
    37
    Posts
    2
    Rep Power
    0

    Exclamation R744(CO2) trans-critical system components



    we are urgently need the following components for a R744(CO2) transcritical refrigeration system
    pressure should be 120Bar
    1.evaporator (air cooler)12Kw
    2.condenser 22Kw
    3.liquid receiver(liquid tank)
    4.oil seperator
    5.solenoid valve
    6.electrical expansion valve
    7.check valve
    8.sight glass
    9.dryer filter
    10. pressure controller
    11, pressure hose
    12.check neddle valve
    13. high pressure control valve
    14. safety valve
    If you can supply the above components, please contact me ASAP.



  2. #2
    Join Date
    May 2012
    Location
    England
    Age
    59
    Posts
    1,537
    Rep Power
    36

    Re: R744(CO2) trans-critical system components

    .

    Most wholesalers in the UK will either stock that
    equipment or be able to source it, have you asked any
    of the large wholesalers?

    Regards

    Rob

    .
    .. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..

  3. #3
    Join Date
    Oct 2003
    Location
    Belgium
    Age
    62
    Posts
    5,645
    Rep Power
    34

    Re: R744(CO2) trans-critical system components

    Rob, hard to find components for more than 60 bar. Where can you find a dryer, sightglass for these pressures?
    It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.

  4. #4
    Join Date
    May 2012
    Location
    England
    Age
    59
    Posts
    1,537
    Rep Power
    36

    Re: R744(CO2) trans-critical system components

    Quote Originally Posted by Peter_1 View Post
    Rob, hard to find components for more than 60 bar. Where can you find a dryer, sightglass for these pressures?
    It's quite common in the UK because the supermarkets are using C02.

    You will find that common fittings (sight glasses excluded) are rated well
    above what C02 runs at and all it takes is a re-issue of an insurance test
    certificate.

    It is surprising just how high fittings are tested to prove them safe,
    it is a lot higher than the X 1.43 that it states in the EN378 standards.

    Regards

    Rob

    .
    .. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..

  5. #5
    Join Date
    Oct 2012
    Location
    Russia
    Age
    42
    Posts
    392
    Rep Power
    18

    Re: R744(CO2) trans-critical system components

    I think you tell us about 2 stage system *****\heat-transfer agent\Cooler CO2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •