Stulz MRU261A Password

[Allrounder]

Does anyone have a password for this unit's controller? it has a yellow left right button, a yellow ok button, yellow reset button and a red on off button. the password is 3 digits.

[install monkey]

Grizzly
VIP PosterI am starting to push the Mods: of RE

Join DateSep 2007LocationSomersetAge58Posts3,360Rep Power16

Re: Stulz Codes

Hi Jasper.
Follow the link.
The info within the manual should help?
Grizzly

http://www.novemakulde.no/07/ins/57_c7000R_eng.pdf
gives 4 digit codes 0000 as general and 2718 as config password unless some hero has set his own code

[install monkey]

stulz phone number
01372749666

[Mick13]

its been a while since i worked on a stulz unit, but i think its left middle right.
BUT there is a time display on the controller, with the : in the middle of the time flashing.
u have to press the buttons when the : is solid.

sounds ridiculous but its true

[licencetochill]

Mick is right, there are two passwords from memory, a basic level to allow set point etc changes .right,middle, left. and its left middle right, cant remember if you have to push it when the time flashing is solid or not there..