Results 1 to 5 of 5
  1. #1
    Join Date
    Mar 2012
    Location
    italy
    Age
    67
    Posts
    78
    Rep Power
    13

    Cascade -90 ° C



    Greetings to all
    I retrofitted a unit cascaded to the second stage with a final temperature of -90 ° C. the system had a load of 1 kg with 0.1 kg R503 R12.
    I replaced the oil with oil poe, and primed, 1 kg 0.1kg R23 with R134a.
    after the test run the final temperature reaches -65 ° C.
    can someone help me with similar experiences?
    which you think may be the right mixture of refrigerant retrofit?
    Thank you.



  2. #2
    Join Date
    Mar 2012
    Location
    italy
    Age
    67
    Posts
    78
    Rep Power
    13

    Re: Cascade -90 ° C

    experts please help me.

    & thanks in advance

  3. #3
    Join Date
    Mar 2006
    Location
    Merate (LC) - Italy
    Age
    52
    Posts
    2,554
    Rep Power
    24

    Re: Cascade -90 ° C

    With R134a is quite impossible to reach -90°C.
    You had to use R23, but then again it is impossible to say, unless you give complete description of components, exchangers and compressors of the two stages.

  4. #4
    Join Date
    Oct 2012
    Location
    Russia
    Age
    42
    Posts
    392
    Rep Power
    18

    Re: Cascade -90 ° C

    You can use ethylene for 2 steps, if you find)

  5. #5
    Join Date
    Mar 2012
    Location
    italy
    Age
    67
    Posts
    78
    Rep Power
    13

    Re: Cascade -90 ° C

    Thanks for the answers
    What do you think if I use the refrigerant R508B?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •