Results 1 to 9 of 9
  1. #1
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    CDK Coldroom Controller



    Can anyone help.
    I can across (for the first time) a Black digital temperature display which has a RJ socket in the front of it.
    This is the connected to a CDK MC10 controller.
    I have checked out their website.
    But there is no info on how you set-up or even access The controller.
    Can anyone help please.
    Grizzly



  2. #2
    Join Date
    Jul 2004
    Location
    NE England
    Age
    56
    Posts
    81
    Rep Power
    21

    Re: CDK Coldroom Controller

    Grizzly
    You need a CDK handset and you also need to set the bit switches on the card for the particular application. E.g HT or LT/ cold room or case and defrost control. If the system is networked to a CDK storescan/ miniscan you can access the settings through those. If you pm me i will send you the bit sw config for your application which will put default settings in, but you will still need a handset for inputting user defined settings.
    Last edited by RONB; 30-01-2013 at 10:18 PM. Reason: Spelling

  3. #3
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: CDK Coldroom Controller

    Quote Originally Posted by RONB View Post
    Grizzly
    You need a CDK handset and you also need to set the bit switches on the card for the particular application. E.g HT or LT/ cold room or case and defrost control. If the system is networked to a CDK storescan/ miniscan you can access the settings through those. If you pm me i will send you the bit sw config for your application which will put default settings in, but you will still need a handset for inputting user defined settings.

    I will contact you Ron.
    Thank you very much for your assistance.
    It is appreciated.
    Can you or anyone else advise where to get these handsets?
    Steve.

  4. #4
    Join Date
    Jul 2004
    Location
    NE England
    Age
    56
    Posts
    81
    Rep Power
    21

    Re: CDK Coldroom Controller

    What is the problem with the controller you have. Also is it a MC10T or MC10C.

  5. #5
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: CDK Coldroom Controller

    I will post later Rob.
    Asd i must be off work calls!
    It is a MC10 c Version MC 10C-V1.3 software

  6. #6
    Join Date
    Aug 2001
    Location
    Nr Manchester, UK
    Age
    54
    Posts
    36
    Rep Power
    0

    Re: CDK Coldroom Controller

    Hi,

    If you let me have your email I can send you a copy of the manual.

    Ian (CDK)
    Attached Images Attached Images

  7. #7
    Join Date
    May 2012
    Location
    England
    Age
    59
    Posts
    1,537
    Rep Power
    36

    Re: CDK Coldroom Controller

    Quote Originally Posted by Grizzly View Post
    Can anyone help.
    I can across (for the first time) a Black digital temperature display which has a RJ socket in the front of it.
    This is the connected to a CDK MC10 controller.
    I have checked out their website.
    But there is no info on how you set-up or even access The controller.
    Can anyone help please.
    Grizzly
    Hi Griz.

    I have had a look through a few old tool boxes in my garage and I have one of the CDK
    hand hold programmers with instructions.

    I can't guarantee it works (It did when I last used it but that was years ago ).

    any way if you PM me an address I can post it to you on Monday.

    Regards

    Rob

    .
    .. ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..

  8. #8
    Join Date
    Sep 2007
    Location
    Somerset
    Age
    69
    Posts
    4,758
    Rep Power
    46

    Re: CDK Coldroom Controller

    Quote Originally Posted by Rob White View Post
    Hi Griz.

    I have had a look through a few old tool boxes in my garage and I have one of the CDK
    hand hold programmers with instructions.

    I can't guarantee it works (It did when I last used it but that was years ago ).

    any way if you PM me an address I can post it to you on Monday.

    Regards

    Rob

    .
    Wow!!
    Above and beyond Rob.
    I will PM you.
    You can let me know where you are, maybe I can return the compliment somehow?
    IanEb (post above) Is also being very helpful.
    These sort of responses help maintain my faith in just how good the forum is.
    So many restrictive practises being generated and Companies restricting access to their info.
    It is an absolute joy to be part of the forum.
    Apparently I have already been to generous with the rep points Rob!
    The system won't let me give you more!

    Ian I have given you a Rep point.
    With 19 posts since 2001 you should join us more!

    Steve

  9. #9
    Join Date
    Aug 2001
    Location
    Nr Manchester, UK
    Age
    54
    Posts
    36
    Rep Power
    0

    Re: CDK Coldroom Controller

    Lol,

    I do tend to lurk somewhat. Always around so I should be able to help with any CDK related questions

    Ian

    p.s. 20 :-)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •