Results 1 to 9 of 9
Thread: CDK Coldroom Controller
-
30-01-2013, 08:52 PM #1
CDK Coldroom Controller
Can anyone help.
I can across (for the first time) a Black digital temperature display which has a RJ socket in the front of it.
This is the connected to a CDK MC10 controller.
I have checked out their website.
But there is no info on how you set-up or even access The controller.
Can anyone help please.
Grizzly
-
30-01-2013, 09:16 PM #2
Re: CDK Coldroom Controller
Grizzly
You need a CDK handset and you also need to set the bit switches on the card for the particular application. E.g HT or LT/ cold room or case and defrost control. If the system is networked to a CDK storescan/ miniscan you can access the settings through those. If you pm me i will send you the bit sw config for your application which will put default settings in, but you will still need a handset for inputting user defined settings.Last edited by RONB; 30-01-2013 at 09:18 PM. Reason: Spelling
-
30-01-2013, 09:26 PM #3
-
31-01-2013, 07:05 AM #4
Re: CDK Coldroom Controller
What is the problem with the controller you have. Also is it a MC10T or MC10C.
-
31-01-2013, 07:07 AM #5
Re: CDK Coldroom Controller
I will post later Rob.
Asd i must be off work calls!
It is a MC10 c Version MC 10C-V1.3 software
-
31-01-2013, 09:57 AM #6
Re: CDK Coldroom Controller
Hi,
If you let me have your email I can send you a copy of the manual.
Ian (CDK)
-
02-02-2013, 12:28 PM #7
Re: CDK Coldroom Controller
Hi Griz.
I have had a look through a few old tool boxes in my garage and I have one of the CDK
hand hold programmers with instructions.
I can't guarantee it works (It did when I last used it but that was years ago ).
any way if you PM me an address I can post it to you on Monday.
Regards
Rob
... ... -. .----. - / -- --- .-. ... . / -.-. --- -.. . / --. --- --- -..
-
02-02-2013, 02:52 PM #8
Re: CDK Coldroom Controller
Wow!!
Above and beyond Rob.
I will PM you.
You can let me know where you are, maybe I can return the compliment somehow?
IanEb (post above) Is also being very helpful.
These sort of responses help maintain my faith in just how good the forum is.
So many restrictive practises being generated and Companies restricting access to their info.
It is an absolute joy to be part of the forum.
Apparently I have already been to generous with the rep points Rob!
The system won't let me give you more!
Ian I have given you a Rep point.
With 19 posts since 2001 you should join us more!
Steve
-
03-02-2013, 10:44 PM #9
Re: CDK Coldroom Controller
Lol,
I do tend to lurk somewhat. Always around so I should be able to help with any CDK related questions
Ian
p.s. 20 :-)