Results 1 to 2 of 2
Thread: Quantum HD conversion
-
21-01-2013, 10:18 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Jan 2013
- Location
- USA
- Posts
- 1
- Rep Power
- 0
Quantum HD conversion
HI, kinda new to this so please bare with me. We have a small steam turbin compressor with an old RWBII plus Frick panel. it also had a Tri-sen govener that had magnetic pickups that told the tri-sen the RPMs. We are converting the RWB to the quantum HD panels. This panel seem to want to see the RPMs directly where the RWB didn't care as long as it recieved the trip signals from the tri-sen. Is there an expert out there that can tell me if I can get a 4-20, 1-5 or 1-10 signal from the tri-sen (cause I can't find it anywhere) or what I can do to the Quantum so that it will read the magnetic pickup (or anything els related to RPMs) so I can get rid of the tri-sen all together.
-
17-02-2013, 10:35 AM #2
VIP Poster
- Join Date
- Aug 2007
- Location
- Sydney
- Age
- 51
- Posts
- 1,083
- Rep Power
- 23
Re: Quantum HD conversion
Hi Jkibenson and welcome to the forum
Please give us a little more detail like part numbers and parameters etc if you can. normally o - 10 or 0 to 5 (VDC) signals not 1 - 5 or 1 -10 that we deal with. We will try to help but most of us like me are not experts. Give us what you can as we need more data and application would be good.
