Results 1 to 9 of 9
Thread: elm controler help and guidence?
-
10-12-2012, 11:28 PM #1
elm controler help and guidence?
Hi i want to try elm programing for eev tev , multi evep, multi comp etc
any body got some old units and progmerer not in use for sale or giveaway
please get in touch
-
11-12-2012, 05:04 PM #2
Elm tusan and universal programer wanted or one unit programed by yourselves
Need help with one unit programed or a hand held elm unit for sale and data sheet with fault codes and parameters
I know i am late as i have found out that honeywell dont do elm any more
Can somebody help in next couple of days??
-
11-12-2012, 10:33 PM #3
Re: elm controler help and guidence?
one of our lads got brand new handset online somewhere.. will ask him where he got it
-
14-12-2012, 06:04 PM #4
-
14-12-2012, 06:47 PM #5
Re: elm controler help and guidence?
-
15-01-2013, 11:40 PM #6
Re: elm controler help and guidence?
managed to get handheld unit it only showes set temp and blind times . cant get in to full set up mode con any body walk me through ?
-
16-01-2013, 08:43 PM #7
Re: elm controler help and guidence?
what model of controller is it ?
-
18-01-2013, 09:09 AM #8
Re: elm controler help and guidence?
tuscan5 190797-ybt and universal 8 chanel alarm 190797-yav
are these units job espacific ? i thought thy could be programed to do different jobs
i want danfoss akv valve with air on & off and gas on & off and forsed deftost by externel timer
-
18-01-2013, 07:29 PM #9
Re: elm controler help and guidence?
Hi Cyotec,
For AKV EEV you want an EEV or EEC control card. I cant recall the YBT doing EEV but I might be wrong as its been a while?.
The EEC range of controllers has a non adjustable alarm threhold, specifically set up for Somerfield but it depends what you can get hold of.
Most if not all controllers do Local or Remote defrost commands.
The 8 channel monitor is a card capable of reading 8 temperatures concurrently if set with different alias.
What specifically do you want to know?
Hope this helps.
Mark