Results 1 to 4 of 4
Thread: Tecnodom blast chiller
-
07-11-2012, 04:13 PM #1
Tecnodom blast chiller
Im looking to find probes for the tecnodom 6 rack blastchiller? any ideas please
-
07-11-2012, 11:08 PM #2
Re: Tecnodom blast chiller
Do you have a model number for it?
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
08-11-2012, 05:01 PM #3
Re: Tecnodom blast chiller
I sure do ,its Model -ABB/SURGE.CERV.5TY08
Sel-1/13167710 ... Code 649005
I'm looking for the air probe sensor not the probe for the product , the reading from it is about 100 degrees c , so im hoping the probe is the problem not the board but ive no way of testing it , if you can help that would be great
Thanks again
-
08-11-2012, 11:06 PM #4
Re: Tecnodom blast chiller
Can't find your model number of their website but reading what brochures they have it seems their "sonda camera" probes are normally PTC type. However if you have an Eliwell controller fitted it might be an NTC type probe.
Either way it's one or the other, 50% chance ?Brian - Newton Abbot, Devon, UK
Retired March 2015