slotted channel

[r.bartlett]

anyone know where to get this type of slotted channel from?
DSC05021.jpgDSC05020.jpg

[chemi-cool]

here: http://www.pipelagging.com/steel-cha...c-209_214.html

Here: http://www.thesitebox.com/cable-mana...t-channel.aspx

And here:http://www.neweysonline.co.uk/newlec...mation.raction

Hope it helps.

[r.bartlett]

here: http://www.pipelagging.com/steel-cha...c-209_214.html

Here: http://www.thesitebox.com/cable-mana...t-channel.aspx

And here:http://www.neweysonline.co.uk/newlec...mation.raction

Hope it helps.

That's just the standard stuff. This is cheaper stronger and about half the weight

thanks any way

[install monkey]

rb you don't want much, currently ive searched tin unistrut,decrative unistrut, unistrut,hilti,sheffield insulations, aluminium unistrut,cabofil,chinese alternative construction materials, cant you just use aluminium strut and but a centrepunch??

[chemi-cool]

http://www.hadleygroup.co.uk/ultrast...-standard.aspx


Google moves in a mysterious ways...

[r.bartlett]

http://www.hadleygroup.co.uk/ultrast...-standard.aspx


Google moves in a mysterious ways...

fook me thats the stuff... beer on me next time in uk.

Can I just say those pictures were done by a subbie of mine and he uses it all the time. It's way better than std strut and I recommend it to all install guy's

[eggs]

fook me thats the stuff... beer on me next time in uk.

Can I just say those pictures were done by a subbie of mine and he uses it all the time. It's way better than std strut and I recommend it to all install guy's

Why didn't you just ask him where he got it from then ??


Cheers

Eggs

[r.bartlett]

Why didn't you just ask him where he got it from then ??


Cheers

Eggs

He worked for the company and his boss died (see Taters) and I had a bit of a falling out with those who took over and ...well you know

[eggs]

lol, just on a wind up mission ...

How is it better than standard stuff and how much cheaper is it? I pay about a tenner for 41x41 and about sevens for 41x21.

Cheers

Eggs

[paulg88]

I used that stuff for a while and thought it was the business but it bends under any kind of weight if spanned over a metre or so. It's good for tray and stuff but that's about it. All our suppliers that used to stock it have stopped too..

[monkey spanners]

Used to use loads of the smaller hilti channel, had markings on it for cm so easy to cut and measure, all the fittings had the nuts and bolts already on, used to use it for hanging cassettes etc.

[stufus]

That stuff is crap , Buckles like Suarez under any sort of load!!!
Cheers
Stu