Results 1 to 9 of 9
Thread: Samsng error 458
-
25-10-2012, 08:54 PM #1
Samsng error 458
Hello,
My MH026FWEA display shows error E559 (outdoos error). My outdoor unit MH060FXEA3A display shows error E458. I think this error is about "outdoor unit fan error". I checked and the fan is working. What could be the problem?
Thank you (I'm portuguese, sorry my english).
Best Regards
Rogério
-
25-10-2012, 09:09 PM #2
Re: Samsng error 458
458 Oudoor unit Fan Error or CT1 over current error ODU DVM, FJMFJM Plus/PlusA : Fan errorDVM Plus3, DVM plus2 : CT1 over current error
probably fan motor failing
-
25-10-2012, 09:52 PM #3
Re: Samsng error 458
Thank you install monkey
So you sugest i replace de motor?
-
25-10-2012, 10:07 PM #4
Re: Samsng error 458
i cant find any service manuals as its a spanish version, trying to find contact details
-
25-10-2012, 11:16 PM #5
Re: Samsng error 458
Q3AnalysisStep 1ContentsWhile using cooling or heating, System Turn off and display E458 Error codeCheck point RemarksE458 Error is related with outdoor unit fan Error.Especially, If system have a some problem in fan, in heating mode , it will be happened.And In auto address setting, without pipe checking operation must be happened it.Check to outdoor fan operation.Step 2 If outdoor fan operation is clear, start to pipe checking operation.GuidanceWhen Auto address setting is finished without pipe checking operation, in heating mode, outdoor unit refrigerantdistribution control is malfunction.It make our system to confuse it’s condition.But, basically this error code is concerned about fan error.
-
26-10-2012, 09:44 AM #6
Re: Samsng error 458
Thank you instal monkey.
Can you send me the english version of the manual, please?
-
26-10-2012, 05:53 PM #7
Re: Samsng error 458
Does anyone can please provide me the service manual for MH060FXEA3A?
Thank you.
-
26-10-2012, 09:19 PM #8
Re: Samsng error 458
-
20-11-2012, 10:03 AM #9
Re: Samsng error 458
Hello,
Thank you Install monkey.
The malfunction was due to a gas leak.
Aftfer a gas charge, the air conditioning is working fine.
Best regards,
Rogério