Results 1 to 3 of 3
Thread: MTA Phoenix
-
03-10-2012, 07:06 PM #1
tchill GuestMTA Phoenix
Hi everyone, any suggestions on starting up above machine after not moving for
two years and moved to new installation?
-
03-10-2012, 11:18 PM #2
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: MTA Phoenix
Hi and welcome to the forum.
What exactly is your MTA Phoenix as a web search brings up a lot of different items under that title. Is it a chiller, a bus or anything similar?Brian - Newton Abbot, Devon, UK
Retired March 2015
-
11-10-2012, 03:16 PM #3
tchill Guest
Re: MTA Phoenix
Hi Brian, it could very well double as a bus :-)
Air cooled 6 stage water chiller - make/model: MTA RAB782
Strange scenario as this is just a temperory installation:
Machine draws in excess of 600A at full load but client only has 200A available.
It is a trial-run and only 20% of full capacity will be needed. I understand that the
delivery capacity can be limited in the controller.
What I mostly need to know is..how to perform a pre-inspection and what to look out for.
Any input will be greatly appreciated.
Cheers!
