Results 1 to 9 of 9
Thread: whirlpool K20, K40 Ice Machine
-
01-10-2012, 03:57 PM #1
whirlpool K20, K40 Ice Machine
I need to get hold of a evaporator coil/plate for a whirlpool K40 ice machine, can anybody tell me if the coil for the K40 is the same size as the coil on a k20?? or is the 40 bigger?, thanks!
-
01-10-2012, 07:28 PM #2
Re: whirlpool K20, K40 Ice Machine
srw do phillips k20/k40 spares and part numbers are different
Evaporator to suit K40 Ice Machine Ref: 108206
Evaporator to suit K20 Ice Machine Ref: 108106
-
01-10-2012, 09:17 PM #3
Re: whirlpool K20, K40 Ice Machine
Thanks monkey, reason i am asking is an ex employee managed to split one on a customers k40 about 6 month ago, i welded it with silver solder and pressure tested and it held until last week got called out and it split again so i got to foot the bill and replace it, they are £200 new but a friend has a k20 for scrap which needs a new compressor so i was seeing if i could swap the evaps over, if not then i gotta bite the bullet!!
-
01-10-2012, 09:47 PM #4
Re: whirlpool K20, K40 Ice Machine
chances are they will be similar but changing them are a pain in the ass,and then rebuilding it,vaccing and gassing then find out it floods back or it was choked on the capillary and that what caused the compressor fail- srw 157quid plus vat
-
02-10-2012, 08:56 AM #5
Re: whirlpool K20, K40 Ice Machine
The plate is the same size, but the pipes are a lot bigger for the K40. We stock the spares so contact us via my Vcard if you want to discuss it with our service manager.
Last edited by frank; 15-11-2012 at 08:49 PM.
-
02-10-2012, 09:07 AM #6
Re: whirlpool K20, K40 Ice Machine
Alternatively, there is a full parts breakdown on both machines available to download from http://www.pentlandwholesale.co.uk/product/K20.aspx even if it doesn't help here, worth having for future reference.
-
14-11-2012, 09:21 PM #7
Re: whirlpool K20, K40 Ice Machine
Hello,
got an old K20 that won't produce
looking for some inspiration here, having printed off the relevent info, thought i would give it a go.
1. disconnected pump
2. compressor runs, evap slab freezes. ( no condensor fan)
3. 20 mins later water inlet opens and water pumps out through drain.
4. unit fails to Harvest (maybe i didn't leave it long enough 45mins)
5. measured ice thickness stat open circuit.
unit sporadicially will wash when wash button pressed.
any ideas plz.
can see the 3 fuses on wiring diagram can only find 1 on unit.
cutter 16v and continuity.Last edited by kelvin278; 17-11-2012 at 08:01 PM.
-
14-11-2012, 11:58 PM #8
Re: whirlpool K20, K40 Ice Machine
Try taking out refriigerant charge weighing and re charging with correct amount.
“Life is like riding a bicycle. To keep your balance you must keep moving” Einstein
-
15-11-2012, 09:04 AM #9
Re: whirlpool K20, K40 Ice Machine
Hi Spimps,
Thanks for that, that's not the news i wanted to hear unit must be at least 15 years old and is running on R12, I know its not full proof but compressor discharge pipes are nice and hot and slab is getting cold, it will produce ice if i can get splash water on the slab. Haven't yet managed to see any schraeder or service connections. I only got roped into this as a favour (transport refrigeration engineer).Last edited by kelvin278; 15-11-2012 at 11:48 AM.