Results 1 to 7 of 7
Thread: panasonic fault codes
-
05-09-2012, 10:17 PM #1
Registered User
Hey, I am new to : RE
- Join Date
- Jun 2009
- Location
- northern ireland
- Age
- 49
- Posts
- 2
- Rep Power
- 0
panasonic fault codes
Hi everyone,
I have been searching for fault codes for a panasonic VRF outdoor unit U-10ME4XPQ and cannot find them anywere. I was sent to change a Compressor and Inverter Board and the unit is showing a fault code U3 on the controller this fault code does not have any of the reference to any of the panasonic codes that I can find. This unit is basically a Daikin with a Panasonic badge on it so both companies are passing the technical help around like a hot potato. I thought I would ask on this site to see if anyone has come across such a problem.
Cheers
-
05-09-2012, 11:00 PM #2
VIP Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2007
- Location
- manchester
- Age
- 50
- Posts
- 5,639
- Rep Power
- 45
Re: panasonic fault codes
Has the
check operation
performed on Outdoor
unit PC board?
Press the BS4 on PC board on the
master outdoor unit for 5 seconds
or more to execute check
operation.
Replace the main PC board on the
outdoor unit
thats off a daikin vrv2
as for panasonic i have no info
-
05-09-2012, 11:04 PM #3
Moderator
I am starting to push the Mods: of RE Site Moderator : and general nice guy
- Join Date
- Mar 2001
- Location
- Dorset
- Age
- 76
- Posts
- 11,025
- Rep Power
- 60
Re: panasonic fault codes
Well U3 on a Daikin is a non-completion of the wiring check procedure which sometimes comes up after a power down and power up operation.
[edit] IM beat me too it.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
08-09-2012, 11:24 AM #4
JawD Guest
Re: panasonic fault codes
As said, that is basically a Daikin unit. The fault codes are identical. Daikin wont touch it though which is fair enough. The issue should be handled by Panasonic or one of their distributors should help.
As for Panasonic fault codes there are many different lists you need. For VRF there is Panasonic (own brand), Panasonic (Daikin) and now Panasonic (Sanyo).
-
08-09-2012, 12:33 PM #5
Veteran Poster
I am starting to push the Mods: of RE
- Join Date
- Oct 2005
- Location
- In a 2 bedroom unit. Why's That? :)
- Posts
- 314
- Rep Power
- 19
Re: panasonic fault codes
I have a list of Panasonic Fault codes for VRF but all the codes i have start with F. Sorry.
-
14-09-2012, 05:50 PM #6
regular poster
- Join Date
- Jul 2005
- Location
- Ireland
- Age
- 56
- Posts
- 164
- Rep Power
- 19
Re: panasonic fault codes
I can't send the fault codes here mail me and I'll send them across Tony.duffy@eu.panasonic.com
T
-
02-12-2012, 09:25 PM #7
improving poster
- Join Date
- Dec 2008
- Location
- Los Angeles
- Posts
- 32
- Rep Power
- 0
Re: panasonic fault codes
It's been a while, but I think Daikin systems will throw a U3 code (comm signal) like a burp. Try to reset the malfunction history (Clear), and re-commission (re-start) the system. Also check the signal strength from the ODU and furtherest IDU. Have the service manual handy, it is your map to success.
If that fails, check to see if there have been any changes to the wiring run (lights, transformers, motors, other EMF/EMI loads).
It is a bad idea to change parts (just the symptom) without knowing the root cause. I do not think the EC was associated with the compressor and inverter board. Both have their own sets of EC's.
I approach VRF systems as though they are working perfectly. Even if there is an EC. Because more often than not, the EC is correct but the part(s) are good. The EC is could a a 1000 foot view or a 1 feet view depending on many factors. Keep an open mind.
Please keep us informed as to what the issue ended up being.
