Results 1 to 4 of 4
  1. #1
    Join Date
    May 2007
    Location
    Scotland
    Posts
    327
    Rep Power
    17

    Wink Help fitting Hitachi Horizontal Scroll ZS7516S1



    IMG_20120901_121904.jpg

    Hello

    I am fitting a Hitachi horizontal scroll Model ZS7516S1 (see picture).

    It's replacing an obsolete Rivacold compressor for a Pastofrigor Multideck.

    Have I got this right (please see picture):

    The accumulator fits directly onto the suction with no inclination the the left or right - this causes me a problem because I don't think there's enough room under the unit for it.

    Is the high pressure connection on the bottom of the compressor for the capillary tube, presumably for the HP switch and cannot be used for the main discharge?

    All comments welcome.

    Thanks.



  2. #2
    Join Date
    Oct 2007
    Location
    manchester
    Age
    50
    Posts
    5,707
    Rep Power
    45

    Re: Help fitting Hitachi Horizontal Scroll ZS7516S1

    Last edited by install monkey; 01-09-2012 at 03:23 PM.

  3. #3
    Join Date
    May 2007
    Location
    Scotland
    Posts
    327
    Rep Power
    17

    Re: Help fitting Hitachi Horizontal Scroll ZS7516S1

    That'll be the discharge on the bottom then! And the liquid injection will be an option !

    Thanks!

  4. #4
    Join Date
    May 2007
    Location
    Scotland
    Posts
    327
    Rep Power
    17

    Re: Help fitting Hitachi Horizontal Scroll ZS7516S1

    Can anyone tell me if the accumulator is correctly positioned on this compressor, or does it need to be completely vertical elsewhere in the suction line?

    (I know the liquid injection capillary is sticking out the discharge pipe)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •