IMG_20120901_121904.jpg

Hello

I am fitting a Hitachi horizontal scroll Model ZS7516S1 (see picture).

It's replacing an obsolete Rivacold compressor for a Pastofrigor Multideck.

Have I got this right (please see picture):

The accumulator fits directly onto the suction with no inclination the the left or right - this causes me a problem because I don't think there's enough room under the unit for it.

Is the high pressure connection on the bottom of the compressor for the capillary tube, presumably for the HP switch and cannot be used for the main discharge?

All comments welcome.

Thanks.