Results 1 to 6 of 6
Thread: YORK YSCACAS2 style C
-
22-08-2012, 02:10 PM #1
YORK YSCACAS2 style C
This alarm appears on the display, the machine is stopped:
STRATER MALFUNTION DETECTED
and Replace, relay board, digital board, power supply and rectifier diode.
I have another point to check?
you will have to manually change the real time clock?
thanks
-
24-08-2012, 10:38 AM #2
Re: YORK YSCACAS2 style C
Hi
it would seem the vsd you have has a power supply problem .
check all the flat cables and connections
when replacing the main card the clock will need to be reset .
this seems like a very vague fault message!!
good luck
THE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
-
25-08-2012, 02:58 PM #3
Re: YORK YSCACAS2 style C
Check the electronic protection of the compressor motor, it is connected in series to the coil of the power contactors and causes alarm of missed departure.
-
27-08-2012, 09:27 PM #4
Re: YORK YSCACAS2 style C
no vsd
electromecanique starter
-
28-08-2012, 07:52 PM #5
Re: YORK YSCACAS2 style C
Hi
check your contacs that feed back an input to the controller on contactors status.
i would also heck your relay board.
good luckTHE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
-
28-08-2012, 10:55 PM #6
Re: YORK YSCACAS2 style C
goshen:
I changed the following parts:
relay board
power supply
diode rectifier
digital input
CM2
the RTC would have some relation with this problem?