410a manifold

[Skexis]

Hi

If one is merely using a manifold through which to evacuate a system or to weigh in additional refrigerant does it matter if one were to use 410a manifolds with 134a refrigerant?

Thanks

[james10]

Why not ......

[RONB]

It is possible. But not the other way round or u will suffer the quinciquonces !!!!!!!!!!!!!!!!!!!!!!

[r.bartlett]

It is possible. But not the other way round or u will suffer the quinciquonces !!!!!!!!!!!!!!!!!!!!!!

Now there's a word you don't see very often!

[Skexis]

lol. Yeah re the other way around. Higher pressure isn't it?

As it is I'm only licenced to do single head splits so I guess a set of 410's is all I'll need. Saves a bit of cash I suppose.

[gwynn jones]

I don't use 410 - does 410 plant not come with different sized gauge line fittings, to stop this cross-over? I thought it did

[install monkey]

5/16 connections on systems- 1/4 at the manifold- also qwik couplers for 5/16 and 1/4 have the same internal diameter so you can use 410 manifolds on anyhing except ammonia systems