Results 1 to 5 of 5
  1. #1
    Join Date
    Jul 2012
    Location
    Belarus
    Age
    38
    Posts
    2
    Rep Power
    0

    Cold conductive solution (adhesive/sealant/double-sided tape)



    Hello everyone,

    Looking for the solution to bond condensing coil to the fridge wall providing maximum cold transfer from tube to sheet.

    Main criteria are the thermal conductivity of adhesive and fast curing time.
    After bonding should be flexible.

    Considering thermal conductive adhesives such as mastics or pastes or double-sided tapes as well. Can you advice any solution from your experience. And who produces it.

    Thanks in advance.



  2. #2
    Join Date
    Jul 2012
    Location
    Belarus
    Age
    38
    Posts
    2
    Rep Power
    0

    Re: Cold conductive solution (adhesive/sealant/double-sided tape)

    nobody has any idea?

  3. #3
    Join Date
    Aug 2006
    Location
    england
    Age
    43
    Posts
    3,790
    Rep Power
    38

    Re: Cold conductive solution (adhesive/sealant/double-sided tape)

    Don't know! Most people here do repairs and installs rather then manufacturing so we don't need to know how to make a condenser out of a wall of a fridge, or even spot weld the pipe to the wall?

    Could you make a dimple plate out of part of the wall? It would get around the problem of bonding the coil and later problems of the glue failing.
    Mostly found in Oxfordshire, UK :)

  4. #4
    Join Date
    Aug 2006
    Location
    england
    Age
    43
    Posts
    3,790
    Rep Power
    38

    Re: Cold conductive solution (adhesive/sealant/double-sided tape)

    Don't know! Most people here do repairs and installs rather then manufacturing so we don't need to know how to make a condenser out of a wall of a fridge.?

    Could you make a dimple plate out of part of the wall? Or even seam weld the pipe to the wall. It would get around the problem of bonding the coil and later problems of the glue failing.
    Last edited by monkey spanners; 01-08-2012 at 06:45 PM. Reason: <b></b>
    Mostly found in Oxfordshire, UK :)

  5. #5
    Join Date
    May 2007
    Location
    Auckland
    Age
    67
    Posts
    3,362
    Rep Power
    31

    Re: Cold conductive solution (adhesive/sealant/double-sided tape)

    most mastics and the like are acid cure so will rip into pipe and create leaks, so top hat section spot welded or rivoted holding pipes in position as in cold walling pipework.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •