Results 1 to 5 of 5
-
20-07-2012, 10:54 PM #1
Mitsi Thermoscreens over door heater problem
Hi all
Wondering if anyone can help. Trying to commission a vrf system over the weekend!
Everything runs up perfect in heating and cooling except the door heater.
I have fitted a fee over the years but this ones seems a newer model and is a bit
different.
The ones I have done before have a battery heater in (3phase supply)
This one does not require this but it says in the booklet that without the heater battery it makes it a 240vsupply instead.
It's addressed as 5 on the system and has a par30 controller. There was no extra box to wire like on previous models.
The problem I have is it runs with no fault but the fans won't come on, I have doubled
Checked everything and all seems fine.
Anyone have any tips as im unning out of ideas.
Thanks
-
20-07-2012, 10:55 PM #2
Re: Mitsi Thermoscreens over door heater problem
VRF PHV1500R DXE HO is the model
-
20-07-2012, 11:20 PM #3
Re: Mitsi Thermoscreens over door heater problem
Don't know the unit but,,, are the fans waiting for the coil temperature to rise?
Last edited by Brian_UK; 20-07-2012 at 11:32 PM.
Brian - Newton Abbot, Devon, UK
Retired March 2015
-
21-07-2012, 07:00 AM #4
Re: Mitsi Thermoscreens over door heater problem
Don't believe it can be this as in heating/cooling I have the same temperature into fan coils as door heater.
It's from a by box and wired correctly. It's been picked up on the centralised and brings up no faults just doesn't run.
-
21-07-2012, 12:35 PM #5
Re: Mitsi Thermoscreens over door heater problem
Check the connections for the fan motor. Seem to remember that we had a problem with the internal wiring and a link that is required and not completely clear on the wiring diagram.
Mobile A/C at its best, see avatar.
Bedford. Now retired and trying to relax.