hi
i have lg ac cool only with low ambient temp connecting comp dis. to evaporater inlet by 2 capillary tube
its compressor is burned
so i replaced it with new one
but whle charging with ***** and pressure reaching 50 psi and 12 amp current and suction line start cooling suddenly the pressure reaches 90 psi and current is 25 amp
some expert advice me to remove the low temp selonid valve sensor and without result
then i removed the solonid valve and its capillary so pressure stabled at 55 psi and 25 amp
then i connect aditional one capillary tube between the filter dryer and evaporater now
so capillary tube number been 3
pressure stabled at 55 with weak ref effect
and current is 15 amp.
where is problem