Advice needed - need engineering / design work done.

[Darrenmv]

I am not sure where I should be asking this question, so here it is.

I need to hire an engineer to design for me a refrigerated box. I need complete drawings and bill of materials. This box will be roughly 72" tall x 39" wide by 33" deep. It will be used to hold fresh flowers. Temperature needs to be close to 34F and no higher than 40F.

Where can I find an engineer or engineering firm that I can hire to do this job for me?

Thanks,
Darren

[spimps]

Fairly small box,wouldn't a small commercial fridge do the job,certainly would temperature wise.
One with a glass door ?

[Darrenmv]

I am sure something like that would work as a starting point. However, I need a completely new design. This box will need to have 7 glass doors on the front and a few other special items. Therefore I really need someone who can do a new design for me. It certainly can be based off of an existing box though.

If you know anyone who can do this design for me I would greatly appreciate the referral.

Thanks,
Darren