Results 1 to 1 of 1
-
14-12-2005, 11:38 AM #1
Help with a basic design for a Safari Vehicle
Hi,
I have unfortunately no experience with design. Only service, installation and fault-finding.
I want to make a 125L freezer box for a commercial safari vehicle. The compressor i'll be using is a Danfoss BDF 35 12-24vdc type.
The evaporator will be static and wrap around the outside of the inner-box.
The condensor will be a small coil cooled by fan.
The expansion device will be a capillary tube.
Insulation thickness 50mm.
Ambient temperature 40 degC
Now is there a consultant agency that can assist with sizing up the components?
Or even better a book which could assist with basic designs?
I have specs of the compressor or they can be obtained from the Danfoss site.
http://www.danfoss.com
I am not on-line and only hook once every 2 day so please be patient.
Looking forward to some assistance.
Cheers
Jem
sanjemd@mweb.co.za
Similar Threads
-
capillary tube design
By Chris Zahrt in forum FundamentalsReplies: 5Last Post: 04-06-2009, 09:16 PM -
heat exchanger design
By Lc_shi in forum FundamentalsReplies: 33Last Post: 13-03-2006, 09:57 AM -
Mini liquid Chiller design
By Sockit2me in forum FundamentalsReplies: 2Last Post: 10-02-2006, 06:38 PM -
R134a <-> liquid heat exchanger design
By DaBit in forum Technical SpeculationsReplies: 19Last Post: 10-05-2002, 08:36 AM