Results 1 to 5 of 5
-
16-06-2012, 10:32 AM #1
New to RE, and already Designing a Cooling Tower System for Tanks :o
Hello
I am completely new to this forum. It's in fact my first contact with "refrigeration".
I am building a steel tank for an industrial* application and it uses a copper cooling coil (I came here to ask about pressure drop calculation of the coil in another thread).
Eventually I will have to find somebody to supply a small cooling tower outside on the roof, add a pump, and a lot of piping. We want to cool a dozen or so tanks.
But since I am in a remote location where technology is often just estimated and calculations and simulations seem to be the exception, I am now looking for knowledgeable people to help me understand what I am actually doing.
All the best,
Alex
* I am actually building this on a small budget for a company with less than a hand full employees, hence I can't just go and find a specialist :/
-
16-06-2012, 03:32 PM #2
Re: New to RE, and already Designing a Cooling Tower System for Tanks :o
But since I am in a remote location where technology is often just estimated and calculations and simulations seem to be the exception, I am now looking for knowledgeable people to help me understand what I am actually doing.
Consultants generally come at a price.
However, Google can assist you to locate a myriad of useful reading materials.
Welcome to RE.Engineering Specialist - Cuprobraze, Nocolok, CD Technology
Rarefied Technologies ( SE Asia )
-
17-06-2012, 03:08 AM #3
Re: New to RE, and already Designing a Cooling Tower System for Tanks :o
-
17-06-2012, 06:13 AM #4
Re: New to RE, and already Designing a Cooling Tower System for Tanks :o
-
19-06-2012, 03:34 PM #5
Re: New to RE, and already Designing a Cooling Tower System for Tanks :o
There we go. LOL...
MF's rate is lower than mine, I assure you...Engineering Specialist - Cuprobraze, Nocolok, CD Technology
Rarefied Technologies ( SE Asia )