Results 1 to 13 of 13
Thread: trane ssm controllers
-
14-06-2012, 07:34 PM #1
trane ssm controllers
Does anyone know how to reset the hours run on the ssm controllers and do you need a password.
-
14-06-2012, 08:20 PM #2
-
15-06-2012, 05:17 AM #3
Re: trane ssm controllers
Hi,
As far as I know there is no SSM controller.
There is SMM and SCM.
In SMM you cannot reset hours and starts.
In SCM you cannot reset hours and starts as standard procedure but you can remove the EPROM and put it again. Then you may have HRD4 alarm and reset hours and starts of ALL compressors but you also have to reprogram the module.
CV
-
15-06-2012, 12:42 PM #4
Re: trane ssm controllers
my mistake its smm on a cgah225 chiller and its coming up with service demand on the screen
saw a van in the states with Grizzly refrigeration on the side! has someone gone multinational.
-
15-06-2012, 03:02 PM #5
Re: trane ssm controllers
I wish!
Oviously they make do with the bear minimum!
Hopefully what I have sent you will help.
Grizzly
-
15-06-2012, 04:45 PM #6
Re: trane ssm controllers
Hi grizzly
not recieved anything what info have you got
cheers redroge
-
15-06-2012, 11:57 PM #7
-
20-06-2012, 01:59 PM #8
Re: trane ssm controllers
well did it help??
THE DEFINITION OF A SMART PERSON IS ONE WHOM LEARNS FROM HIS MISTAKES!!!
-
20-06-2012, 06:56 PM #9
Re: trane ssm controllers
Been back today that info dos,nt seem to relate to smm controllers !
Phoned trane to ask what service demand means and they refuse to give any information,anyway the customer is,nt having any more trane chillers as there aftersales is so bad.
-
20-06-2012, 07:20 PM #10
-
21-06-2012, 09:14 AM #11
Re: trane ssm controllers
Thanks grizzly
Could,nt get past Fp will have another go next week when back at work (on a three day week).
-
25-06-2012, 05:54 PM #12
Re: trane ssm controllers
Thanks grizzly
been back to site today all sorted.
-
25-06-2012, 06:05 PM #13