Results 1 to 7 of 7
  1. #1
    Join Date
    Dec 2008
    Location
    Portugal
    Age
    48
    Posts
    1,044
    Rep Power
    19

    Mycom software selection



    Hi Guys,

    I've tried to get the last software at the MAYEKAWA at its web page but it's not available.

    Try to get it from the general internet but no luck.

    The version I have is the 4.11ep_j and it's very old...year 2000...

    Does some has one at least less old than the mine.

    Thanks


    To make progress is never good enough, I want to do better and better and better

  2. #2
    Join Date
    Jan 2006
    Location
    Croatia
    Age
    68
    Posts
    2,299
    Rep Power
    31

    Re: Mycom software selection

    Hi, Sandro

    have the same and not sure if there is some new or newer version, let's wait ...


    Best regards, Josip

    It's impossible to make anything foolproof because fools are so ingenious...

    Don't ever underestimate the power of stupid people when they are in large groups.

    Please, don't teach me how to be stupid....
    No job is as important as to jeopardize the safety of you or those that you work with.

  3. #3
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Mycom software selection

    There is a new version but its a protected programme so cannot copy.
    It has new series Mycom "J" screw on it (very similar to SGC Frick).

  4. #4
    Join Date
    Dec 2008
    Location
    Portugal
    Age
    48
    Posts
    1,044
    Rep Power
    19

    Re: Mycom software selection

    Some day I'll ask it to MAYEKAWA...however I doubt they give me.

    Ranger1, how the program is protected? It is need a password?
    To make progress is never good enough, I want to do better and better and better

  5. #5
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Mycom software selection

    Sandro,
    Put it this way it can't be send via email or a link or copy it, as far as I know.
    We get a disc sent to us when an update occurs.
    Same with JCI if your lucky!

  6. #6
    Join Date
    Jan 2006
    Location
    Croatia
    Age
    68
    Posts
    2,299
    Rep Power
    31

    Re: Mycom software selection

    Hi, RANGER1


    Quote Originally Posted by RANGER1 View Post
    Sandro,
    Put it this way it can't be send via email or a link or copy it, as far as I know.
    We get a disc sent to us when an update occurs.
    Same with JCI if your lucky!
    I have Coolware 8 from JCI (registered user), but update check is going automatically whenever I use a program ... of course checking my credentials ....

    Is there some other JCI program required a disc for update? .... maybe for HVAC ... just asking?


    The same is with Sabroe MatchMaster ... must be installed from original CD with embedded data of my company .. update is automatic online ... and not possible to copy and lend it ....


    Best regards, Josip

    It's impossible to make anything foolproof because fools are so ingenious...

    Don't ever underestimate the power of stupid people when they are in large groups.

    Please, don't teach me how to be stupid....
    No job is as important as to jeopardize the safety of you or those that you work with.

  7. #7
    Join Date
    Dec 2007
    Location
    australia
    Posts
    3,356
    Rep Power
    39

    Re: Mycom software selection

    Josip,
    I was refering to Matchmaster & Mycom having same restictions.
    Makes it hard for people who do not have access.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •