Results 1 to 4 of 4
Thread: Copeland DKLD 15X
-
24-04-2012, 05:57 PM #1
rookie poster
- Join Date
- Feb 2005
- Location
- United Kingdom
- Age
- 73
- Posts
- 18
- Rep Power
- 0
Copeland DKLD 15X
Hi all,
I have just taken over a new site and they have a Copeland DKLD 15X I am going to have to retrofit it with (MO49) R437A and replace the LP and fam motoer assm.
Can anybody tell me where I can get the fan motor assm for this unit as it appears to be obsolete or an equivilent motor assm will do
-
24-04-2012, 07:03 PM #2
Moderator
Site Moderator : and general nice guy
- Join Date
- Sep 2003
- Location
- ISRAEL
- Age
- 72
- Posts
- 4,248
- Rep Power
- 46
Re: Copeland DKLD 15X
What diameter are the fans? This info might be of some help..........
Check with Copeland or take a look at www.hvacrinfo.com
-
25-04-2012, 02:37 PM #3
Veteran Poster
- Join Date
- Feb 2012
- Location
- Bolivia
- Posts
- 270
- Rep Power
- 14
Re: Copeland DKLD 15X
Can't you place it in the discharge flow of the condenser fan?
I don't know the fan diameter of this compressor in particular, but all the vertical fans I know from Copeland are 300mm and I replace them with EBM's S4D300-EA16-06 or S4D300-EC28-09. Have to make the base though.
-
25-04-2012, 02:50 PM #4
rookie poster
- Join Date
- Feb 2005
- Location
- United Kingdom
- Age
- 73
- Posts
- 18
- Rep Power
- 0
Re: Copeland DKLD 15X
Many thanks to you all -300mm is the size and I can get them from Thermoforst Cryo
Many thanks to you all
