Results 1 to 5 of 5
Thread: C72 Thermostats
-
15-04-2012, 12:25 AM #1
C72 Thermostats
A few years ago, in fact quite a few years ago when I was doing my apprenticeship we used to often make use of a C72 mechanical/electrical thermostat when working on the older type of window wall units. It was quite a handy stat as it could take a fair bit of single phase current around 15amps (ideal for some of the bigger units) it was also very useful as it had the ability to go from a cooling mode to a heating mode automatically with a differential in between. I was wondering if anybody remembers these stats and if they are still available nowadays.
Many Thanks
-
15-04-2012, 11:05 PM #2
Re: C72 Thermostats
Don't know about a C72 but Marstair/ IMI ect used to use the classic Ranco C17 2 stage stat and they're still out there...
http://www.applegate.co.uk/listings/...1-2356042.htmlBrian - Newton Abbot, Devon, UK
Retired March 2015
-
15-04-2012, 11:13 PM #3
-
16-04-2012, 01:44 AM #4
Re: C72 Thermostats
Hi Piewie
Decades ago here in NZ every old style split system and window rattler had a C72 control stat., have not seen them here lately probably been replaced with another that will fail and sell as a spare part replacement.
-
01-05-2012, 02:14 PM #5
Re: C72 Thermostats
Thanks guys I think you are right it is a C17 got my letters and numbers muddled.