Results 1 to 5 of 5
  1. #1
    Join Date
    Apr 2012
    Location
    USA
    Age
    37
    Posts
    7
    Rep Power
    0

    TK SB-200 How to clear code 3



    Hi.

    Had alarm codes 11 and 3 on SB-200. Was able to clear code 11. But cant seem to clear code 3. How can I clear that code? Thank You!



  2. #2
    Join Date
    Dec 2007
    Location
    Melbourne
    Posts
    349
    Rep Power
    18

    Re: TK SB-200 How to clear code 3

    power on, cycles off, hold TK and clear buttons, press Alarm press clear, if it doesn't clear scroll to DDUR press TK and clear, press alarm and clear buttons.

    Doesn't fix the problem

  3. #3
    Join Date
    Nov 2010
    Location
    The Netherlands
    Age
    64
    Posts
    134
    Rep Power
    14

    Re: TK SB-200 How to clear code 3

    Code 3 is return sensor defective. Code 11 is unit controlling on alternative sensor (normally discharge sensor).
    Are sure the sensor is good?

  4. #4
    Join Date
    Apr 2012
    Location
    USA
    Age
    37
    Posts
    7
    Rep Power
    0

    Re: TK SB-200 How to clear code 3

    Robert Hilton, going to get it checked after I get unloaded. Just wanted to clear the code to bring my status light back to green since the unit is running ok for now.

  5. #5
    Join Date
    Apr 2012
    Location
    USA
    Age
    37
    Posts
    7
    Rep Power
    0

    Re: TK SB-200 How to clear code 3

    Replaced the sensor, cleared the code, all good now, Thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •