Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2006
    Location
    Northern Ireland
    Posts
    31
    Rep Power
    0

    Circuit Board for Waterfurnace EKW08 heatpump



    Would like to know where I can purchase a Circuit Board for Waterfurnace EKW08 heatpump.
    It is a single phase 230Volt unit.

    All advice and comments appreciated

    Regards



  2. #2
    Join Date
    Aug 2007
    Location
    Sydney
    Age
    51
    Posts
    1,094
    Rep Power
    23

    Re: Circuit Board for Waterfurnace EKW08 heatpump

    Hi mac
    If you can't get the pcb you could just use a generic controller which works out cheaper more often than not. There are controllers available now for most applications with probes etc normally 240V four wire configuration.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •