Results 1 to 4 of 4
  1. #1
    Join Date
    Jan 2008
    Location
    qatar
    Age
    51
    Posts
    61
    Rep Power
    17

    rgarding about moisture



    hi my friends, let me know ho to remove moisture from the systems, because one of my paul klinge container system is getting high pressure but low pressure is too low. and suction line is getting too ice. my openin is going to remove all refrigerant from the system and replaced filter drier then deep vaccuam. let me know correct methods if it is wrong.
    thanks with kind regards
    rkmoorthy




    TRY TO LEARN MORE ABOUT A/C SYSTEM

  2. #2
    Join Date
    Jun 2010
    Location
    Wales
    Posts
    45
    Rep Power
    0

    Re: rgarding about moisture

    Hello rkmoorthy,
    normally dont you get high head & low back pressures when non-condensables are present?

    even so, yeah you want to recover refrigerant/non-condensables replace, filter drier and then maybe tripple vac the system until 2 torr then charge to manufacturers guide lines..

    Thanks,

  3. #3
    Join Date
    Mar 2012
    Location
    italy
    Age
    67
    Posts
    78
    Rep Power
    13

    Re: rgarding about moisture

    Hello rkmoorthy,
    If there are any non-condensable refrigerant charge must be replaced with a new one if the amount of refrigerant is very convenient to distill refrigerant.
    for dehydration instead need to install a large capacity filter with shut-off valves for easy replacement, remember that a filter with large capacity desiccant.
    regards

  4. #4
    Join Date
    Oct 2007
    Location
    manchester
    Age
    50
    Posts
    5,707
    Rep Power
    45

    Re: rgarding about moisture

    http://www.free-ed.net/sweethaven/Me...Num=8&modNum=3
    this may help
    but use a torr gauge instead of a cup of oil!
    and use new refrigerant to recharge system
    Last edited by install monkey; 09-04-2012 at 03:30 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •