Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2009
    Location
    New York
    Posts
    43
    Rep Power
    0

    How to remove Optiset feature from Thermoking SB-400?



    Hi everybody,
    previous owner of trailer programmed the unit to run on a cycles all times using optiset. Any ideas on how to remove this?



  2. #2
    Join Date
    Jan 2008
    Location
    Texas
    Age
    65
    Posts
    132
    Rep Power
    17

    Re: How to remove Optiset feature from Thermoking SB-400?

    Set box temp. for 80 deg. hold the clear button until box temp. goes to 35 deg., all done

  3. #3
    Join Date
    Dec 2007
    Location
    Melbourne
    Posts
    349
    Rep Power
    18

    Re: How to remove Optiset feature from Thermoking SB-400?

    Nice tip, must let the drivers know that one !

    is that set point high for the celcius crowd dabutcher?

    to do this thru the menu's, goto super guarded access. Cycles off, unit on, (hold TK and CLEAR) scroll thru hourmeters to DDUR(hold TK and CLEAR).
    Go to SET I (setpoint increments) hold TK and CLEAR, this will then take you to the optiset screen where you can change setpoint high and setpoint low,cycles on/off in frozen and chiller ranges etc...

    if you scroll past SET I press the alarm button and you'll go back to the start.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •