Results 1 to 6 of 6
-
11-04-2012, 07:35 PM #1
Mitsubishi Electric Condensor Fan control
Hi Guys I've got a Mitsu unit SUZ-A09. Condensor fan runs on heating mode. On Cooling mode the Condensor coil gets hot and the gas can be heard passing through the unit.Then the fan cuts in for ten seconds cools the coil and the gas noise goes . The same thing happens all over again. Does anyone know what controls the Condensor fan in these units? Should it run all the time?
-
11-04-2012, 07:49 PM #2
Re: Mitsubishi Electric Condensor Fan control
probably sog
-
11-04-2012, 07:51 PM #3
Re: Mitsubishi Electric Condensor Fan control
https://rapidshare.com/files/4132394...OC304revA_.pdf;
check your outdoor sensors- discharge sensor and coil sensor
also check for flashing lights on the indoor unit
-
11-04-2012, 08:58 PM #4
Re: Mitsubishi Electric Condensor Fan control
Not SOG . I'll check the sensors cheers install Monkey
-
11-04-2012, 09:02 PM #5
-
11-04-2012, 09:22 PM #6
Re: Mitsubishi Electric Condensor Fan control
Yes mate cheers.