Mitsubishi Electric Condensor Fan control

[Neddy]

Hi Guys I've got a Mitsu unit SUZ-A09. Condensor fan runs on heating mode. On Cooling mode the Condensor coil gets hot and the gas can be heard passing through the unit.Then the fan cuts in for ten seconds cools the coil and the gas noise goes . The same thing happens all over again. Does anyone know what controls the Condensor fan in these units? Should it run all the time?

[r.bartlett]

probably sog

[install monkey]

https://rapidshare.com/files/4132394...OC304revA_.pdf;
check your outdoor sensors- discharge sensor and coil sensor
also check for flashing lights on the indoor unit

[Neddy]

Not SOG . I'll check the sensors cheers install Monkey

[install monkey]

did you get the manual for thermistor values?

Not SOG . I'll check the sensors cheers install Monkey

[Neddy]

Yes mate cheers.