Results 1 to 2 of 2
-
03-04-2012, 12:18 AM #1
Circuit Board for Waterfurnace EKW08 heatpump
Would like to know where I can purchase a Circuit Board for Waterfurnace EKW08 heatpump.
It is a single phase 230Volt unit.
All advice and comments appreciated
Regards
-
03-04-2012, 08:35 AM #2
Re: Circuit Board for Waterfurnace EKW08 heatpump
Hi mac
If you can't get the pcb you could just use a generic controller which works out cheaper more often than not. There are controllers available now for most applications with probes etc normally 240V four wire configuration.