Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2012
    Location
    Zambia
    Age
    46
    Posts
    21
    Rep Power
    0

    TK SB III SR+ uP-IV controller how to access super guarded access



    Hi anyone knows how to access the superguarded access of uP -IV controller to activate the service alarms? I have pressed the TK logo for three seconds but it doesn't show up the guarded access mode. I have tried it when the engine is not running the only thing appeared is Pre Trip.



  2. #2
    Join Date
    Oct 2011
    Location
    Saudia Arabia
    Age
    45
    Posts
    73
    Rep Power
    13

    Re: TK SB III SR+ uP-IV controller how to access super guarded access

    Hi

    you can press TK and Clear bottom togather at the same time to 10 seconds . then you will be at gurded accsses . then press select key to transmit from place to another .

  3. #3
    Join Date
    Nov 2010
    Location
    The Netherlands
    Age
    64
    Posts
    134
    Rep Power
    14

    Re: TK SB III SR+ uP-IV controller how to access super guarded access

    Unit on, not running, all alarms cleared (if possible) continuous run selected.
    Press TK & Clear and hold until the unit enters Guarded Access (hour meters).
    Press mode (circle) repeatedly until you reach Ddur.
    Press TK & Clear and hold until the unit enters Super Guarded Access (CRA)
    Press mode to scroll further through the menu.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •