Results 1 to 3 of 3
-
12-06-2012, 11:08 AM #1
Need to fit drain heaters to Thermo King V200
Hi All
I need to fit drain heaters to a thermo king V200, The unit has the new model controller fitted and is not the old box type.
There is a couple of spare plugs located in the evaporator housing but none of them have any power, I was wondering are these for drain heaters?
I have checked the PCB and there is no blank fuses for drain heaters.
Regards
Chris
-
12-06-2012, 06:43 PM #2
Re: Need to fit drain heaters to Thermo King V200
fuse f3 will controll drain heaters if plugs wired in sometimes there is a blank in the jack plug get a low watt on eout of hubbard or gah and wire them to fan supply just upgrade the fuse by 5 amps
-
12-06-2012, 07:42 PM #3
Re: Need to fit drain heaters to Thermo King V200
hi chris is the unit a v200max just v200 dont have heaters plugs if max should be 27 and 27a ok clive