Results 1 to 8 of 8
Threaded View
-
27-03-2012, 05:01 PM #1
elevation pressure loss for refrigerant lines
Is this formula correct enought for suction line :
delta P = 9.81 * Density of the gas * Height
I am wondering becasue i am checking VRF pipe network and i assume that there will be a big difference in density so i would calulate an average.
My evaporator coils are placed above compressor.
Thanks in advance, any help would be apritiatedBe careful about reading health books. You may die of a misprint.