Results 1 to 7 of 7
-
24-03-2012, 06:15 AM #1
Setting up part center in Singapore
Hi guys,
I am planning to setup part center in Singapore; especially for chiller such as Carrier, York, and Trane.
Appriciate if you can share with me for any reliable & competitive supplier contact.
Thank you.
-
25-03-2012, 02:49 AM #2
Re: Setting up part center in Singapore
There is alot of after market parts components what ever available out of India, a big capital investment to have high value stock on the shelf, contact Carrier, York and Trane for agency deals and they will laugh at you as would already have OEM parts available locally. Iseco are already operating in your area and would be hard to compete with. So just stick to standard commercial component stocks. Go to trade shows in Germany/Anuga and China gwongshau/ [spell check ]. You will need a big cheque book, andas well import agents to organise shipping etc.. and thats before selling the first flare nut, or roll of tube.
Start with an internet based operation, and clip the ticket to make a dollar.
-
25-03-2012, 09:55 AM #3
Re: Setting up part center in Singapore
Good Post, Magoo!
However your antipidian terminology has confused me, what's "clip the ticket"?
Very good answer by the way.
Grizzly
-
25-03-2012, 10:13 PM #4
Re: Setting up part center in Singapore
Hi Grizzly.
Clip the ticket, refers to a percentage commission fee payable/ receivable for business referals, making money without leaving the office.
magoo
-
26-03-2012, 03:57 AM #5
Re: Setting up part center in Singapore
Pricing is important too, I worked for a Chiller Specialist who purchaced spare parts from Singapore cheaper and faster than from USA.
-
26-03-2012, 12:41 PM #6
Re: Setting up part center in Singapore
We carry out the Eddy Current Tubing Examination for "York", "Trane", & "Carrier" if tubes detected with defect we also carry out retubing.
Getting Enhanced Copper tubes from suppliers not easy and need Qualities sometimes minimum order 100 tubes but doesn't need that many.
Do you have such service to provide?
-
27-03-2012, 08:02 AM #7
Re: Setting up part center in Singapore
where's john tan these day's?