Results 1 to 3 of 3

Thread: Custom Controls

  1. #1
    Join Date
    Mar 2012
    Location
    US
    Age
    27
    Posts
    1
    Rep Power
    0

    Custom Controls



    Hi Guys this is my first Post,

    A little background, I am a systems tech for Johnson Controls and have only been there a short time I am new to the industry and have found my way into the controls side however the mechanical side has always interested me so here is my project.

    I have a portable air conditioner that has a fried circuit board. I have removed it and will be using a Johnson Controls Controller to replace it along with relays for the fans and compressor circuitry.

    My question comes in for the sensors, the existing circuitry monitored pipe temps which is how it cycled the compressor on and off so it did not run it too long and freeze it up. What kind of temps should I be looking for and where should my sensors go? I will take this and write a program to replace the existing circuitry. Just a rainy day kind of project haha

    Thanks guys!



  2. #2
    Join Date
    Oct 2007
    Location
    manchester
    Age
    44
    Posts
    5,709
    Rep Power
    39

    Re: Custom Controls

    cant you just buy a new pcb-saves having to hide an outstation-

  3. #3
    Join Date
    Apr 2006
    Location
    UK
    Age
    48
    Posts
    1,920
    Rep Power
    23

    Re: Custom Controls

    Hi straightexhaust

    I would presume a pcb is a lot cheaper than an ivensis, which would cost alot more than a $150 portable a/c

    unless you have aquired one, as so to speak

    also can you help jci controls engineers over here by emailing me invensis doc's & programme

    R's chillerman
    If the World did not Suck, We would all fall off !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •