Results 1 to 4 of 4

Thread: Thermagel

  1. #1
    Join Date
    Dec 2010
    Location
    Toronto, Canada
    Age
    60
    Posts
    1,492
    Rep Power
    24

    Thermagel



    Has anyone used Thermagel or equivalent and if so, do you trust it around a TXV or sight glass over the a wet rag treatment?



  2. #2
    Join Date
    Jun 2009
    Location
    North East England
    Age
    41
    Posts
    714
    Rep Power
    19

    Re: Thermagel

    I've used a product called pyrocool and never had an issue used it on exvs and mag valves with success

  3. #3
    Join Date
    Aug 2006
    Location
    england
    Age
    49
    Posts
    3,874
    Rep Power
    46

    Re: Thermagel

    I've use pyrocool too, its very good but takes a bit of cleaning up after, especially if its dried out a bit. Have used it to protect painted panels when brazing next to them.

    Prefer wet rags for general brazing, have a load of those yellow cotton dusters in a small tub of water.
    Mostly found in Oxfordshire, UK :)

  4. #4
    Brian_UK's Avatar
    Brian_UK is offline Moderator I am starting to push the Mods: of RE Site Moderator : and general nice guy
    Join Date
    Mar 2001
    Location
    Dorset
    Age
    76
    Posts
    11,192
    Rep Power
    60

    Re: Thermagel

    I'll go along with Monkey here, good stuff but not always the only choice.
    Brian - Newton Abbot, Devon, UK
    Retired March 2015

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •