Results 1 to 4 of 4
Thread: Thermagel
-
15-03-2012, 09:58 PM #1
Thermagel
Has anyone used Thermagel or equivalent and if so, do you trust it around a TXV or sight glass over the a wet rag treatment?
-
15-03-2012, 10:18 PM #2
Re: Thermagel
I've used a product called pyrocool and never had an issue used it on exvs and mag valves with success
-
15-03-2012, 10:36 PM #3
Re: Thermagel
I've use pyrocool too, its very good but takes a bit of cleaning up after, especially if its dried out a bit. Have used it to protect painted panels when brazing next to them.
Prefer wet rags for general brazing, have a load of those yellow cotton dusters in a small tub of water.Mostly found in Oxfordshire, UK :)
-
15-03-2012, 10:51 PM #4
Re: Thermagel
I'll go along with Monkey here, good stuff but not always the only choice.
Brian - Newton Abbot, Devon, UK
Retired March 2015