Results 1 to 3 of 3
Thread: R600a samsung fridge freezer
-
15-03-2012, 07:09 AM #1
R600a samsung fridge freezer
Hi, I have just regassed my Samsung fridge/freezer SRL629 and am confused with the following results.
The manual states 65g of R600a is the charge but this seems completely inadequate with the resulting pressures I am getting. I have taken a gamble and doubled the amount of gas but running pressures are still 4 bar discharge and 10hg ie vacuum suction .The standing pressure of the system is not even 0.25 bar. The unit has reached the desired temperatures, however according to the chart I have, the standing pressure at -18oc (freezer temp) should be 0.8 bar and 10oc (current ambient)2.2 bar. So the actual standing pressures should be somewhere in between.
This all says to me, undercharged, but I dare not add any more gas.
Any suggestions would be much appreciated.
-
15-03-2012, 08:21 AM #2
Re: R600a samsung fridge freezer
the amount of r600a you need is listed on sticker inside fridge charge to that amount only
-
16-03-2012, 07:59 AM #3
Re: R600a samsung fridge freezer
I have tried that but the standing pressure is 0 bar with the whole system at 10oc. The gas was supplied by HRP in a Care10 canister, so I would assume it is the correct gas.