Results 1 to 2 of 2
Thread: Trane techview
11-03-2012, 12:38 PM #1
Hi everyone. i've downloaded version 13.0 of TRANE techview.Some simple direction of how i will conect my laptop to an RTAC chiller with an EASYVIEW controller and what cable i'll need? Thank you.
27-03-2012, 11:58 AM #2
Re: Trane techviewA standartd RS232 9-pin D connector serial cableisused to connect the Dynaview or EasyView to the serial port of the PC or laptop running TechView. If laptop does not have RS232 port, a USB to RS232 adaptor can be used.