Results 1 to 7 of 7
Thread: Chiller BLUE BOX problem
-
05-03-2012, 11:45 AM #1
Chiller BLUE BOX problem
I have a Blue Box chiller model KAPPA.V.55.2 SR BBOX066494 with a Carel controller model PCO 1000 CPB . The chiller start work`s fine for 5-15 minutes and than stop the display is shutting down and restarting and display this : internal erorr nr 1 , atom nr 65, off set 00230 . After 1 minute the display is loading again all the values and restarting the chiller . Please help me with some ideeas !
-
05-03-2012, 07:26 PM #2
Re: Chiller BLUE BOX problem
Are you in a position to swap the controller over with another one?
It sure sounds unhealthy!
Grizzly
-
05-03-2012, 10:43 PM #3
Re: Chiller BLUE BOX problem
Is the control module from the original machine?
If it is a 're-cycled' board with re loaded software, there could be a prevent mechanism from its previous life causing the 'reset' occurance.
The software / control picks up an irregularity and forces a 'reboot'
Sounds like it'll need a new board.
-
06-03-2012, 07:18 AM #4
Re: Chiller BLUE BOX problem
The controller is the original one .For me this seems to be a software problem . No i don`t have a spare electronic board . Corect me if i am wrong : all the parametres are stored in the main electronic board no`t in the Pco display !
-
06-03-2012, 10:02 PM #5
Re: Chiller BLUE BOX problem
It could be directly related to the board it is plugged into.
If possible i would test it with another display or PCO controller.
Sounds like a software bug, but i'm sure Blue Box have more than one chiller with this software on it?!
Thus the possibility it is hardware related. Maybe contact a Blue Box representative for info.
And of course you are correct. The logic is all in the electronic board!
-
11-03-2012, 02:02 PM #6
Re: Chiller BLUE BOX problem
ciao tex
Per aiutarti ho bisogno del numero dell'applicativo software
-
11-03-2012, 02:03 PM #7
Re: Chiller BLUE BOX problem
Sorry
To help you I need your software application