Page 1 of 2 12 LastLast
Results 1 to 50 of 69
  1. #1
    Join Date
    Feb 2005
    Location
    Jamaica
    Posts
    121
    Rep Power
    20

    thermoking container manuals



    Have a CFII thermoking unit,anyone has a manual i could use,here is the thing.
    All the writings on the control is missing have now was of knowing what is what,HELP!!!!!!



  2. #2
    Join Date
    Nov 2005
    Location
    Jamaica/cayman island
    Age
    46
    Posts
    15
    Rep Power
    0

    Talking Re: thermoking container manuals

    Jamcool you may need to post a photo of this unit.
    Ewart
    Last edited by ewart; 15-11-2005 at 03:45 AM.

  3. #3
    Join Date
    Nov 2001
    Location
    Shropshire
    Age
    59
    Posts
    260
    Rep Power
    23

    Re: thermoking container manuals

    Hi WHich model is it, what controller...do you have a BM number

  4. #4
    Join Date
    Nov 2005
    Location
    Jamaica/cayman island
    Age
    46
    Posts
    15
    Rep Power
    0

    Re: thermoking container manuals

    the BM number is 090171 and the serial number is 0324350730, this is jamcool using ewarts log in

  5. #5
    Join Date
    Nov 2001
    Location
    Shropshire
    Age
    59
    Posts
    260
    Rep Power
    23

    Re: thermoking container manuals

    OK, no luck with the BM or S/No...
    Its a CFII what model should be M something from 4 to 40....can you identify the controller model

  6. #6
    Join Date
    Feb 2005
    Location
    Jamaica
    Posts
    121
    Rep Power
    20

    Re: thermoking container manuals

    i see M19.3 as model number the thing is unit still icing back to the suction line,the charge has not changed read the sensors,coil 3670 ohms,return 3290 ohms,and discharge 3310 ohms I think those are ok,it has 9 relays on it K1 to K9 would like to know which control what also any manuals or wiring drawings that can be found.
    ANY HELP WOULD BE GOOD
    jamcool

  7. #7
    Join Date
    Nov 2001
    Location
    Shropshire
    Age
    59
    Posts
    260
    Rep Power
    23

    Re: thermoking container manuals

    I have a manual in PDF for you, its 19meg...contactme off list.
    John.

  8. #8
    canunez's Avatar
    canunez Guest

    Re: thermoking container manuals

    I have a CFII unit and I am looking for a manual. Did you ever find yours? Can you help me?

  9. #9
    Join Date
    Nov 2001
    Location
    Shropshire
    Age
    59
    Posts
    260
    Rep Power
    23

    Re: thermoking container manuals

    please contact me off list.
    JOhn.

  10. #10
    WBSERVICEFTW's Avatar
    WBSERVICEFTW Guest

    Re: thermoking container manuals

    Help,

    Does Anyone Out There Have A Service / Operations Manual For A Thermo King Cfii M37.
    Container Unit. Or Know Where We Might Be Able To Find One. Any Help Would Be Greatly Appreciated....thanks

  11. #11
    Join Date
    Aug 2005
    Location
    uk
    Posts
    46
    Rep Power
    0

    Re: thermoking container manuals

    Hi,
    just try to check the suction trottle valve or the 3 way valve,before that is i found in our unit,our unit is refrigeration van that we use in aircraft.

  12. #12
    spool25's Avatar
    spool25 Guest

    Re: thermoking container manuals

    Hello Guys,

    I am also looking for Thermo King manuals. The two manuals I am looking for are

    Parts Manual for SB-III 30 SR+
    Maintenance Manual SB-III 30 & 50
    SR+ µP-IV+

  13. #13
    tariqenng's Avatar
    tariqenng Guest

    Re: thermoking container manuals

    i need thrmoking mechecal rfigertion dia gram any one have please dend me

  14. #14
    tariqenng's Avatar
    tariqenng Guest

    Re: thermoking container manuals

    any one who can tell me about refigertion cyecal about thrmo king

  15. #15
    tariqenng's Avatar
    tariqenng Guest

    Re: thermoking container manuals

    Quote Originally Posted by Reeferjon View Post
    I have a manual in PDF for you, its 19meg...contactme off list.
    John.
    ok
    i willl get the model no

  16. #16
    Thermoking.kong's Avatar
    Thermoking.kong Guest

    Re: thermoking container manuals

    have you tried a thermoking dealer
    you will need the unit serial number

    also this site wont allow me to mail it to you as its 23 mb

  17. #17
    tariqenng's Avatar
    tariqenng Guest

    Re: thermoking container manuals

    is anyone have service manuals of xmt thrmoking

  18. #18
    Join Date
    Feb 2005
    Location
    Hong Kong
    Posts
    190
    Rep Power
    20

    Re: thermoking container manuals

    Hi Tariq Engg.

    Are you working for transport company or a service agent there? XMT is an old generation nosemount truck freezer unit from 1970's - early 80's powered by either Onan or Wisconsin gasoline engines.
    Abbar in Jeddah and Riyadh may be able to help with manuals and parts.
    Some countries 'repower' these with Yanmar or Kubota diesels and continue to run them today.
    If Abbar cannot help w/ parts contact me offline. There's a warehouse nearby me where a large inventory of old hard to find parts for XMt, XKW.XRW and NWD stocked.

    Its not a 'Container' unit or Reefer unit like CF11/CSR/CRR as fitted on 20'/ 40' ISO ocean going boxes.

    Spool 25 - which part of USA do you work and likewise are you working with owner/transport or a repair company?
    Did you try local agent or MPLS Hq for these? If you are an owner or in the trade, they would be happy to oblige I'm sure.
    Remember what Augustus once said:
    "festina lente" - make haste, slowly!

  19. #19
    REEFER-TEK's Avatar
    REEFER-TEK Guest

    Re: thermoking container manuals

    I have a full library collection of all makes and models of TK and CTC units in PDF.

    I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T

  20. #20
    pedrefer's Avatar
    pedrefer Guest

    Re: thermoking container manuals

    We have a box with XMT-50 now operating as a stationary unit removed from road chasis, powered by 3 phase 230 volt.

    I am Looking for a manual and any information in retrofiting to R134a.

  21. #21
    Join Date
    Dec 2007
    Location
    Tampa, Florida U.S.A
    Age
    51
    Posts
    590
    Rep Power
    17

    Re: thermoking container manuals

    Quote Originally Posted by pedrefer View Post
    We have a box with XMT-50 now operating as a stationary unit removed from road chasis, powered by 3 phase 230 volt.

    I am Looking for a manual and any information in retrofiting to R134a.
    Hi pedrefer,

    I see your new here to RE, welcome aboard.

    Why not convert the sytem to (MP66 R401b). The cooling capacity is better and the sytem is more forgiven to this basic conversion.

  22. #22
    Join Date
    Apr 2008
    Location
    Portugal
    Posts
    36
    Rep Power
    0

    Re: thermoking container manuals

    go to web site o fdupon and the have refrigerant for conver direc, not need oil poe

    best regards

  23. #23
    Join Date
    Dec 2007
    Location
    Tampa, Florida U.S.A
    Age
    51
    Posts
    590
    Rep Power
    17

    Re: thermoking container manuals

    Quote Originally Posted by paulo almeida View Post
    go to web site o fdupon and the have refrigerant for conver direc, not need oil poe

    best regards
    http://www.refrigerants.dupont.com/S.../suvamp66.html

  24. #24
    Join Date
    May 2006
    Location
    ENGLAND
    Posts
    109
    Rep Power
    18

    Re: thermoking container manuals

    Yes i agree MP66 is the way to go.May have manual will let you know

  25. #25
    micki_kp's Avatar
    micki_kp Guest

    thermoking wiring diagram

    I am looking for a wiring diagram for a thermo king some dummy took the wiring harness out of the unit before they were ready to replace it. any help would be grately appreciated.

    thermo king
    model sll-38 max
    b.m
    092039
    serial # 0518819091
    ref
    r502 16 lbs
    thank you in advance.

  26. #26
    Join Date
    Dec 2007
    Location
    England
    Age
    71
    Posts
    26
    Rep Power
    0

    Re: thermoking container manuals

    contact Amer Basaeed @Abbar jeddah

  27. #27
    micki_kp's Avatar
    micki_kp Guest

    Re: thermoking container manuals

    do you have an email address?

  28. #28
    Join Date
    Sep 2006
    Location
    england
    Posts
    285
    Rep Power
    18

    Re: thermoking container manuals

    how old is the version of reefer manager

  29. #29
    Brakefield Man's Avatar
    Brakefield Man Guest

    Re: thermoking container manuals

    Quote Originally Posted by Reeferjon View Post
    I have a manual in PDF for you, its 19meg...contactme off list.
    John.
    I understand you have a PDF Manual for Thermking CFII-M40, is it possible to forward me a copy?

    Cheers

    peterkelly@spxservices.co.uk

  30. #30
    Join Date
    May 2008
    Location
    Belgium
    Age
    66
    Posts
    802
    Rep Power
    16

    Re: thermoking container manuals

    why not make a WIKI somewhere on this forum ,where we can drop all kinds of manuals, or schema's from simple split to highly sofiticated units.
    so if someone needs it ,he can simply daownload it.

    its only an idea,
    Ice

  31. #31
    Join Date
    Dec 2007
    Location
    Tampa, Florida U.S.A
    Age
    51
    Posts
    590
    Rep Power
    17

    Re: thermoking container manuals

    Quote Originally Posted by icecube51 View Post
    why not make a WIKI somewhere on this forum ,where we can drop all kinds of manuals, or schema's from simple split to highly sofiticated units.
    so if someone needs it ,he can simply daownload it.

    its only an idea,
    Ice
    Copyright of proprietary documents can result in lawsuits based on violation of infringements acts.

    Tread the waters carefully as big sharks swim here.

    A-Z

  32. #32
    Join Date
    Nov 2001
    Location
    Shropshire
    Age
    59
    Posts
    260
    Rep Power
    23

    Re: thermoking container manuals

    What AZ said....
    Practice Truth, Fear Nothing.

  33. #33
    Join Date
    Dec 2007
    Location
    England
    Age
    71
    Posts
    26
    Rep Power
    0

    Re: thermoking container manuals

    TP. dont forget that some xmt units had tukomski engines fitted. I think they were for the US market.we used to get a few in jeddah...

  34. #34
    Hummer's Avatar
    Hummer Guest

    Re: thermoking container manuals

    I'm looking for a refrigeration circuit diagram for a SB-310+ or similar unit with an electronic throttling valve.

  35. #35
    Rodolfo Plata's Avatar
    Rodolfo Plata Guest

    Re: thermoking container manuals

    Quote Originally Posted by REEFER-TEK View Post
    I have a full library collection of all makes and models of TK and CTC units in PDF.

    I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T
    ____________

    Would you have among your collection a XMT thermo king service manual? Unbelievably, We have one of those unit still operating.
    Regards,
    R. Plata

  36. #36
    me777's Avatar
    me777 Guest

    Re: thermoking container manuals

    Quote Originally Posted by Reeferjon View Post
    I have a manual in PDF for you, its 19meg...contactme off list.
    John.
    Hello ,would you please send me somehow that 19MB ThermoKing manuals PDF; have some alarm codes trobleindicator xls for: REEF AL-CODES-list of indicationsalarms and troubleshooting
    for:SabroeTNE405D,E ;TNE406 ;tne508/558 ; Carrier 69NT40 521-xx ;69NT40 511-xx ;69NT40 4xx-xx ;Thermo King Controller mP-C ;yP-a ;yP-A+ ;yP-D ;Thermo King CRR-40 ;Seacold Controler CMS 02 ;RMC-Cargo ;DCM9R.....and plenty of other but don't have that Thermo PDF.Thanks

  37. #37
    rftvict_vietnam's Avatar
    rftvict_vietnam Guest

    Re: thermoking container manuals

    Quote Originally Posted by absolute-zero View Post
    Copyright of proprietary documents can result in lawsuits based on violation of infringements acts.

    Tread the waters carefully as big sharks swim here.

    A-Z
    hello, I am a new member of the Forum
    I approve your opinions.The document sharing is essential for anyone.It will help us more in identifying the problems to which the repair.
    I have some documents about reefer container,although not many and update
    but it will help those who need.
    if anyone should send mail to me.
    it's OK
    vict_0938007114@yahoo.com.vn
    hope to receive cooperation from members
    thanks


  38. #38
    lsinc1's Avatar
    lsinc1 Guest

    Re: thermoking container manuals

    Quote Originally Posted by REEFER-TEK View Post
    I have a full library collection of all makes and models of TK and CTC units in PDF.

    I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T
    Hi,

    Is the wintrac software avaiable for download? If so could you send me a link?

    Thank you
    Tony

  39. #39
    Join Date
    Dec 2008
    Location
    usa
    Posts
    27
    Rep Power
    0

    Re: thermoking container manuals

    yes we have them- i can fax you what you might need?

  40. #40
    Bermejol's Avatar
    Bermejol Guest

    Re: thermoking container manuals

    Quote Originally Posted by REEFER-TEK View Post
    I have a full library collection of all makes and models of TK and CTC units in PDF.

    I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T
    Hi all, I am new here. I am needing all information possible for the Thermo King V-500, MD I And MD II SR.
    thanks for your support.
    Thanks and good luck.

  41. #41
    xtremeoption's Avatar
    xtremeoption Guest

    Re: thermoking container manuals

    kindly sennd me link. Many thanks


    Quote Originally Posted by REEFER-TEK View Post
    I have a full library collection of all makes and models of TK and CTC units in PDF.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T

  42. #42
    Join Date
    Feb 2009
    Location
    CHICAGO, IL. USA
    Age
    42
    Posts
    22
    Rep Power
    0

    Re: thermoking container manuals

    there are so many cf-II units produced, with so many small differences, that you really do need the specific model number to have the right wiring diagram and fix the unit properly.

  43. #43
    Join Date
    Apr 2009
    Location
    SWFL
    Age
    79
    Posts
    10
    Rep Power
    0

    Question Re: thermoking container manuals

    How do I contact you? I need help(manual)
    wrench

    Quote Originally Posted by REEFER-TEK View Post
    I have a full library collection of all makes and models of TK and CTC units in PDF.

    I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T

  44. #44
    Join Date
    Apr 2009
    Location
    SWFL
    Age
    79
    Posts
    10
    Rep Power
    0

    Talking Re: thermoking container manuals

    Quote Originally Posted by metricwrench View Post
    How do I contact you? I need help(manual)
    wrench
    If I add an email address, would that help?
    thanks
    wrench====== shadow@harleydeals.net

  45. #45
    biopetro's Avatar
    biopetro Guest

    Re: thermoking container manuals

    Hello everyone,

    I recently bought a used Thermoking CGII M-22 15kw generator. But the controller was toasted due to corrosion could someone help me with a manual for this unit?

    Thanks,

    TD

  46. #46
    Join Date
    Feb 2009
    Location
    CHICAGO, IL. USA
    Age
    42
    Posts
    22
    Rep Power
    0

    Re: thermoking container manuals

    Quote Originally Posted by biopetro View Post
    Hello everyone,

    I recently bought a used Thermoking CGII M-22 15kw generator. But the controller was toasted due to corrosion could someone help me with a manual for this unit?

    Thanks,

    TD
    I think i have a manual, but you prob wont need it. Those boards are really one of the only problems you see with those gens. It corrodes slightly from the box letting moisture in and then it burns itself. I can almost guarantee if you put a new board in it, it will fire up and work fine.

  47. #47
    fabio-zinpao's Avatar
    fabio-zinpao Guest

    Re: thermoking container manuals

    Hello folks!
    I need the MP3000 controller manual and the electric diagram. I appreciate if anyone could help me.

  48. #48
    HTL10's Avatar
    HTL10 Guest

    Re: thermoking container manuals

    Hi. I saw your quote and i was wondering if there is anyway you can send me a download of WinTrac 4.6, Refer Manager, Sr2 diagnostic tester rev3. I been trying to get it forever so i would be glad happy. if you can't then it's ok. Thank. please reply

    Hai

    Quote Originally Posted by REEFER-TEK View Post
    I have a full library collection of all makes and models of TK and CTC units in PDF.

    I would like to complete my collection with a Deltec Vector and X2 manual if anyone has any of these in PDF to share or email that would be very cool.

    If anyone here is looking for anything I probably have it. Including software wintrac 4.6, reefer manager, SR2 diagnostic tester rev3, ibox 5308, dataview dos, optiset 3.26 rev and way to many more to name off here.

    Regards R-T

  49. #49
    HTL10's Avatar
    HTL10 Guest

    Re: thermoking container manuals

    My email is Haitle10@yahoo.com

  50. #50
    Join Date
    Jul 2008
    Location
    Sokołów Podlaski
    Age
    47
    Posts
    7
    Rep Power
    0

    Re: thermoking container manuals

    Can you send the manuals at pasqual@poczta.onet.pl

Page 1 of 2 12 LastLast

Similar Threads

  1. Thermoking
    By ddocwra in forum Transport
    Replies: 10
    Last Post: 11-09-2010, 11:51 AM
  2. refrigerated container
    By chemi-cool in forum Commercial
    Replies: 8
    Last Post: 08-12-2009, 11:15 PM
  3. Cooling down the water in a 1000 liter container
    By Joep Hogenhout in forum Technical Discussions
    Replies: 29
    Last Post: 21-04-2009, 01:27 AM
  4. Looking for thermoking genset take outs.
    By RaFelix in forum Commercial
    Replies: 7
    Last Post: 22-07-2008, 02:04 AM
  5. Help Deikin MA90AV1 manuals
    By JAGw in forum Air Conditioning
    Replies: 3
    Last Post: 27-07-2006, 08:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •