Results 1 to 6 of 6
Thread: piping selection for R404A
-
10-11-2005, 11:27 AM #1
piping selection for R404A
hello frnds,
is there any software/data vth u for piping selection for R404A? if so plz send/suggest me the link/data.
and tell me how we have to design a system for R404A?
i.e.,because it is a zeotropic refrigernt, how we can use dew/bubble properties of it in the design?
have a nice day
D.RAVI KANTH,M.E (R&AC)
ISHRAE,MIET
-
10-11-2005, 06:55 PM #2
Re: piping selection for R404A
Use the free downloadable software of Danfoss, Danven.
It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
10-11-2005, 07:40 PM #3
Re: piping selection for R404A
Hi Peter,
Can you post the link please?
Chemi
-
10-11-2005, 10:51 PM #4
Re: piping selection for R404A
http://www.danfoss.com/United_Kingdo...tion+Tools.htm
You must first log-in freely. You receive automated password via email and then you can download everything.It's better to keep your mouth shut and give the impression that you're stupid than to open it and remove all doubt.
-
13-11-2005, 08:44 PM #5
Re: piping selection for R404A
You can also look up the link to Sporlan's site and down load theri software. Yo do need to now enough to use the proper velocity limits and pressure drops for the system.
Ken
-
14-11-2005, 06:33 AM #6
Re: piping selection for R404A
Originally Posted by drk_in
http://www.suva.dupont.ca/pdf/RefrigPipingII_HFC.pdf
Similar Threads
-
Pressure piping test
By Volnei in forum IndustrialReplies: 7Last Post: 03-07-2010, 10:30 PM -
Selection of capillary tubes
By patrickj in forum CommercialReplies: 11Last Post: 19-06-2008, 02:45 PM -
Piping Advice
By Mickvee in forum Air ConditioningReplies: 10Last Post: 11-06-2006, 03:39 PM -
Vibration in refrigerant piping
By US Iceman in forum Technical DiscussionsReplies: 5Last Post: 01-05-2006, 11:53 PM -
selection of centrifugal fan
By watana in forum Air ConditioningReplies: 0Last Post: 14-09-2003, 04:02 AM